In the late 1800's there were many, nationwide, cast iron foundries. The top dogs were Wagner, Griswold, and Lodge. They were from Pennsylvania to Ohio to Tennessee. There were smaller foundries too that make great products still in use, but not manufacturing. The only company to survive it all is Lodge. It's still made right here in Tennessee. Most of my collection is a combination of old and new Lodge. By new, I mean post 1960. In 1960 we started importing cast iron from Asia. If you have an old piece marked Made in the U.S.A., its post 1960. Lodge still makes an excellent product, but the process has changed. No longer will you find smooth cast iron. It's now made by sand blast casting. Thankfully, it's still very budget friendly too. You can purchase a 10.5 inch, brand new, Lodge at your local Walmart for under twenty dollars. It will outlive all of us reading this, with proper care. This is my personal collection, minus a few pieces.
Griswold and Wagner are the most sought after for collectors. I have seven pieces of those brands. It's expensive, if the seller knows what they have. However, I've found pieces for pretty cheap at thrift stores. They will need some help adding life back into them, but it's worth the elbow grease.
Today, I'm going to walk you through the refurbishing process of a vintage Griswold skillet. I was able to purchase this on eBay from a lovely seller who's from Erie, P.A. I inquired about the age of the skillet and maybe if they used it regularly. They were very kind in replying that they are downsizing their collectibles, and selling off duplicate pieces that have gotten too heavy to use. A great website to check the age of your old iron is www.castironcollector.com. I've been able to learn so very much from that site. My skillet was made between 1937- 1955. That's all I really know for sure about it's age. I do know it's a great skillet, just needed sixty years of seasoning, rust, and crust removed. It was an all day process, but I was happy with the finished product.
This is what I started with. It had rust, crust, and looked like someone had taken a sander to it. A sander will help remove a ton of gunk. I went with vinegar, salt, and heat.
I started by scrubbing with hot soapy water. I then added it to my kitchen sink with about 1/2 a gallon of white vinegar and hot tap water. I soaked it 2 hours. Periodically scrubbing, with a steel scrubber to check how the de-funk process was coming along. Vinegar will rust cast iron, at a point. I suggest checking at 1 hour intervals, but soaking no longer than overnight.
It was hard, baked on, old seasoning. After about 2 hours, I flat gave up! I placed it in my oven on 500 degrees for 1 hour. I then, cracked my oven open to start cooling it faster. If you remove a blazing hot piece of cast iron to a cooler room, you run the risk of warping it. Once it cooled enough to handle, I scrubbed with hot water. Then, I added kosher salt. The salt is a natural abrasive. I used the steel scrubber. I even tried a potato, as one website suggested. Just don't. It's a waste of potato. I put every bit of my large self into scrubbing this sucker. I focused mostly on the inside. No offense to previous owners, but I have no clue what was previously poured into it.
So I scrubbed, and scrubbed some more. I noticed all the rust was gone. Rust is cast iron's worst enemy. The bottom was beginning to get smooth. After about 20 minutes of giving it all I had, I was happy with what little season was left. I deemed it safe for us to use.
Then I rinsed several times. Placed it on the stove, on medium heat, and began drying. I started with a dish towel, to absorb the first layer of water. Then finished with a paper towel. Now, it was time to season.
Seasoning choices are very individual. I've successfully used lard, Crisco shortening, grape seed oil, and coconut oil. I chose lard for this skillet. I figured its what my fore mothers would have originally used, so I went with a classic. Lard can be purchased for under two dollars at the grocery store.
Just do NOT set the plastic tub directly ON the warm skillet! I did, and that was an idiot move on my part. I snapped this picture before doing that. I had to scrub more and that's when the skillet ended up in the oven. Plastic on bare iron is NOT good.
When rubbing in the lard, you have to be sure to get every nook and cranny of your skillet. The inside, outside, handle and under the handle. Rub and wipe, using a paper towel or coffee filter several times. You want it looking dry before baking it on, in the oven. If you have it too thick, you will have spots, like I did. It won't hurt your skillet, but just learn from me. After it's thoroughly coated, place inverted, in a 450 degree oven, for one hour. Turn the oven off, and leave it to cool. You can do this before bed, and leave it overnight. When you get up, you'll have a perfectly seasoned skillet.
After all my hard labor yesterday, I HAD to bake something in it. I chose brownies over my usual cornbread. To add another layer of seasoning, I used coconut oil, in a cold skillet. I ran it around just the inside this time.
Thank the Lord, they didn't stick! In fact, I was able to flip the whole pan out, onto a plate! I then rinsed in hot water, gave it a quick scrub with my kitchen brush to remove any chocolaty bits. Added some more coconut oil and placed it back in the still warm oven. This morning it was dry and slippery.
I needed to add a coat of seasoning to some other skillets, so I lubed them all with a thin coat of lard, cooked on 450 an hour, and smoked up my whole house by seven a.m.
One last note. If you purchase new Lodge, it comes pre seasoned. The seasoning does work, because I used a brand new skillet Santa brought me to cook Christmas dinner. However, when I get new skillets, I always do my own coat of seasoning. Following the above process.
For daily maintenance, until your skillet is good and black, I use Crisco or regular cooking oil to oil after using. Then you can use Pam. Be sure to only use soap if the skillet is really gross. Always oil after using. Your skillet, old or new will last lifetimes. You can pass these down through generations. I know this, because my greatest treasure, in skillet form, belonged to my great grandmother.
I know this is a very long post, but I've been waiting a while to share it, and I hope you learned something! I've learned from many, from trial and error, and the fun of every day use.




















